Dual Mag Stabilizer Bracket   This bracket is a must when running a dual Pro Mag system. The lightweight aluminum bracket clamps tightly around the generator housings and holds them securely together. Note: For 12 and 44 Amp Band Clamp generators only. Dual Mag Stabilizer Bracket PN 8118
	Hold Down Clamps   These clamps are CNC machined from chrome moly steel to produce maximum strength without excessive bulk. The Clamp features a unique three point mounting system that “bites” into the housing ensuring a firm hold. Each Clamp is supplied with a mounting stud, lock washer and stainless nut. Chevy PN 8110 Chrysler PN 8540 Ford PN 8010
	Dunn Cross Drive    All of the MSD band clamp style Pro Mags use a “Dunn Cross Drive”. The MSD Dunn Drive is CNC machined from 1018 steel then receives a corrosion resistant QPQ coating. The replacement drive mechanism is supplied with a new locknut for installation. Cross Drive for Band Clamp Pro Mags 0.900” Tall PN 8107 Extra Tall Dunn Cross Drive 1.070” tall PN 8129
	12LT Chevy Slip Collar and Clamp   The Chevrolet Pro Mag 12LT, PN 7908, features a unique Slip Collar and Anti-Rotation Clamp assembly. The Clamp features MSD’s three point clamp design plus its straight edges match to the Slip Collar so it cannot rotate at all. Anti-Rotation Clamp Steel, 0.22lbs PN7905 Titanium, 0.13lbs PN 8011 Locking Slip Collar (PN 7908 only) PN 7906
	Band Clamp   This extra strong, locking band clamp is required when using a Band Clamp magneto mount (12 or 44 versions). The stainless steel Clamp tightly locks and holds the generator to its drive housing. Band Clamp PN 8146
	Points Box Vibration Mounts   Racing produces a tremendous amount of vibration from tire shake and engine power not to mention the occasional bump and grind in the corners. These Vibration Mounts are just the thing to help isolate severe racing vibrations from the Pro Mag Electrical Box or other accessories. Four mounts and hardware are included in each kit. Vibration Mounts, 12 and 44 Amp Electronic Points Box PN 8823 Note: Recommended for use on Points boxes in oval track racing. Vibration Mounts 44 Amp Coil PN 8822 Note: Recommended for use in drag racing applications.