RPM MODULE KITS

    MSD RPM Modules can be used with MSD Rev Controls, Shift Light, RPM Switches and Module Selectors. Each RPM Module Kit includes five modules within a 1,000 rpm range in 200 rpm increments.

 

RPM Range	Part No.	RPM Range	Part No.
3,000 - 3,800	PN 8743	3,100 - 3,900	PN 87431
4,000 - 4,800	PN 8744	4,100 - 4,900	PN 87441
5,000 - 5,800	PN 8745	5,100 - 5,900	PN 87451
6,000 - 6,800	PN 8746	6,100 - 6,900	PN 87461
7,000 - 7,800	PN 8747	7,100 - 7,900	PN 87471
8,000 - 8,800	PN 8748	8,100 - 8,900	PN 87481
9,000 - 9,800	PN 8749	9,100 - 9,900	PN 87491
10,000 - 10,800	PN 8750	10,100 - 10,900	PN 87501
11,000 - 11,800	PN 8751	11,100 - 11,900	PN 87511
12,000 - 12,800	PN 8752	12,100 - 12,900	PN 87521
13,000 - 13,800	PN 8753	13,100 - 13,900	PN 87531

MAGNETO RPM ACTIVATED SWITCH

    These Selectors allow you to choose from 12 different rpm limits simply by turning a knob! They are designed to be mounted within easy reach of the driver so last minute rpm limits can be dialed-in. Six models are available.

 

 

 

RPM Range	Part No.	RPM Range	Part No.
3,000 - 5,200	PN 8670	4,600 - 6,800	PN 8671
6,000 - 8,200	PN 8672	7,600 - 9,800	PN 8673
9,000 - 11,200	PN 8674	10,600 - 12,800	PN 8675

 

ADJUSTABLE SHIFT LIGHT

   A bright cluster of LEDs illuminates bright enough to view in daylight and the rpm point is easy to adjust with plug-in rpm modules.

Adjustable Shift Light PN 8952

Notes: Must be used with the MSD PN 8132 Tach Converter or PN 8168 Retard Control. Requires a 12 volt source. RPM Modules must be purchased separately.

SHIFT LIGHT

   This easy to mount and unobtrusive light flashes on bright to alert you to shift. An RPM Activated Switch is required to complete this Shift Light’s circuit.

Shift Light PN 7552