MSD Programmable Pro Mag Controller
PN 8973*

The new MSD Programmable Pro Mag Controller opens a window of ignition tuning opportunities for racers using the MSD Pro Mag!

This Programmer combines MSD’s race proven Pro-Data+ programming technology with the incredible power of the Pro Mag. The easy-to-use Windows based software makes plotting an ignition curve or altering the timing of individual cylinders simple. The result is accurate and consistent control over your Pro Mag’s timing in ways never before possible!

Total Pro Mag Programming Control

• Individual Cylinder Management allows up to 10° of retard per cylinder.
• 
  Plot a time based retard curve in 0.05 second intervals and 0.1° increments.
• 
  
• Program an ignition curve in relation to boost pressure up to 75 psia or psig.
• 
  
• Activate and deactivate a circuit by engine boost pressure, rpm or in time down to 0.1 second.
• 
  
• Program a timing curve down to 0.1° per 100 rpm increments up to 12,500 rpm.
• 
  
• Set different rpm shift points for each gear shift and a retard for each gear.
• 
  Select a timing curve for use on the holeshot to improve traction.
• 
  Square wave tachometer output signal for acquisition equipment.
• 
  Set three different stages of retard for independent activation.
• 
  View the timing curves and retards in real time.
  

Easy Programming with Pro-Data+

This software program is designed exclusively for MSD Programmable Controllers. This easy to use program lets you plot your ignition curves, rpm limits, shift points, retards and more from your laptop!

The Pro-Data+ opens quickly and displays plotted charts for timing curves and a program ladder. There is also a tachometer and timing gauges that will show in real time the rpm and timing changes by either running the engine or triggering the system through the MSD Tester, PN 8993.

This only scratches the surface of what the Pro-Data+ software offers. The Pro-Data+ software can be used with any PC running Windows 95, 98, NT and 2000. It is available on a 3.5 floppy or can be downloaded through the MSD Ignition website here.

Plotted rpm/timing chart for the entire run and the launch curve.

Run the engine or trigger the controller with an MSD Tester, PN 8993, and view the timing curve through the rpm range!

Download and store programs with accompanying notes to review or save for similar situations.

Program curves that you would like to test then upload them at the track!

Print out the curves and specifications of the entire program.

Here are some wiring diagrams showing single and dual Pro Mag setups with the MSD Programmable Controller.

You will need Acrobat Reader to view files, download it here

Single Pro Mag Installation

Dual Pro Mag Installation