|
|
 Billet
Titanium Lock Down Clamp
Every ounce counts, so MSD offers this Titanium Lock Down
Clamp. It will lock the Chevy Pro Mags securely in place and weighs
less than 2 ounces! Supplied with hardened stud, lock washer and
nut.
Chevy
Titanium Lock Clamp
0.13 lbs. PN 8011
|
|
|
Quick
Release Mounting Panel
This sheet metal mounting panel makes removing and installing
your MSD Electronic Points Box simple. It is designed to mount
on the engine side of the dash panel. A ground terminal and Dzus
fasteners are supplied.
Quick
Release Mounting Panel for 12 Amp Electronic Points Box PN 8102
|
|
|
Pro
Mag Bags
These heavy duty nylon bags will protect your Pro Mag system from
water and mud during post-race cleanup or even on the track. Each
bag is made from a durable nylon with a polyurethane backing to
repel water and has a thick draw cord with a quick release barrel
lock.
Mag
Bag Pro Mag 12LT Generator PN 8166
Mag Bag Pro Mag with Large Cap
Generator PN 8165
Mag Bag 12 Amp Electronic
Points Box PN 8167
|
|
|
Timing
Tape
This Timing Tape will make last second timing changes easier.
The 12LT housings feature a pointer that will show the number
of degrees of change when you move the generator.
Timing
Tape for 12LT Generators PN 7926
|
| Custom
8.5mm Super Conductor Spark Plug Wire Sets |
The MSD 8.5mm Super Conductor Spark Plug Wires are the only
wires recommended for use with the Pro Mag. The wires feature
a copper alloy conductor that is tightly wrapped around
a special center core to create a highly effective EMI choke.
With this design, the wire has less than 50 ohms resistance
per foot, but does not interfere with any other electronics!
Each wire is numbered for its desired cylinder and all terminals
and boots are factory installed.
|
| Part
Number |
Description |
Spark
Plug |
Magneto
Cap |
| PN
31549 |
Chevy
Sprint Car, Tight Fit |
90° |
90° |
| PN
31579 |
Chevy
Sprint Car, Loose Fit |
90° |
90° |
| PN
31569 |
Ford
Engine Sprint Car |
90° |
90° |
| PN
31629 |
Chrysler
Engine Sprint Car |
90° |
90° |
|
